The Conettix ITS-D6686 Ethernet Network Adapters (ITS-D6686-INTL and ITS-D6686-UL) are used to connect the Conettix D6600 Communications Receiver/Gateway to IPv6 and IPv4 networks (LAN/WAN/Internet). The adapter allows the D6600 to process messages to and from most networks using User Datagram Protocol/Internet Protocol (UDP/IP). Conettix ITS-D6686 Ethernet Network Adapters are compatible with both IPv6 and IPv4 networks. A minimum of one adapter is required for each D6600. The two serial ports allow for a variety of installation options including Network Failover Solution.
Functions | Network Failover Solution
A Conettix System with two D6600 receivers and two ITS-D6686 adapters can be used to allow for a redundant backup in the event of first system failure. Each adapter has two serial ports that allow it to be connected to a primary and backup receiver at the same time. In this configuration using the D6200 software, when the primary receiver is updated the backup receiver will also be updated. Each adapter also supports an alternate MAC Address that can be used to switch between adapters on primary and backup systems without any network problems. Refer to the Conettix D6600 Systems Guide - Network Communications for details.
Manufacturer
The Bosch Group
Manufacturer Part Number
ITS-D6686-UL
Manufacturer Website Address
http://www.bosch.com
Brand Name
Bosch
Product Line
Conettix
Product Model
ITS-D6686-UL
Product Name
Conettix ITS-D6686-UL Device Server
Marketing Information
The Conettix ITS-D6686 Ethernet Network Adapters (ITS-D6686-INTL and ITS-D6686-UL) are used to connect the Conettix D6600 Communications Receiver/Gateway to IPv6 and IPv4 networks (LAN/WAN/Internet). The adapter allows the D6600 to process messages to and from most networks using User Datagram Protocol/Internet Protocol (UDP/IP). Conettix ITS-D6686 Ethernet Network Adapters are compatible with both IPv6 and IPv4 networks. A minimum of one adapter is required for each D6600. The two serial ports allow for a variety of installation options including Network Failover Solution.
Functions | Network Failover Solution
A Conettix System with two D6600 receivers and two ITS-D6686 adapters can be used to allow for a redundant backup in the event of first system failure. Each adapter has two serial ports that allow it to be connected to a primary and backup receiver at the same time. In this configuration using the D6200 software, when the primary receiver is updated the backup receiver will also be updated. Each adapter also supports an alternate MAC Address that can be used to switch between adapters on primary and backup systems without any network problems. Refer to the Conettix D6600 Systems Guide - Network Communications for details.
Packaged Quantity
1
Product Type
Device Server
Media Type Supported
Twisted Pair
Ethernet Technology
Fast Ethernet
Network Standard
10/100Base-TX
Network (RJ-45)
Yes
Serial Port
Yes
Number of Network (RJ-45) Ports
1
Number of Serial Ports
2
Input Voltage
120 V AC
Height
0.9"
Width
2.9"
Depth
3.7"
Weight (Approximate)
9.17 oz
Package Contents
Conettix ITS-D6686-UL Device Server
1 x Plug-in Power Supply
2 x DB9 F/F Null Modem Serial Cables (1.83 m [6 ft])
The Conettix ITS-D6686 Ethernet Network Adapters (ITS-D6686-INTL and ITS-D6686-UL) are used to connect the Conettix D6600 Communications Receiver/Gateway to IPv6 and IPv4 networks (LAN/WAN/Internet). The adapter allows the D6600 to process messages to and from most networks using User Datagram Protocol/Internet Protocol (UDP/IP). Conettix ITS-D6686 Ethernet Network Adapters are compatible with both IPv6 and IPv4 networks. A minimum of one adapter is required for each D6600. The two serial ports allow for a variety of installation options including Network Failover Solution.
Functions | Network Failover Solution
A Conettix System with two D6600 receivers and two ITS-D6686 adapters can be used to allow for a redundant backup in the event of first system failure. Each adapter has two serial ports that allow it to be connected to a primary and backup receiver at the same time. In this configuration using the D6200 software, when the primary receiver is updated the backup receiver will also be updated. Each adapter also supports an alternate MAC Address that can be used to switch between adapters on primary and backup systems without any network problems. Refer to the Conettix D6600 Systems Guide - Network Communications for details.
Packaged Quantity
1
Product Type
Device Server
Media & Performance
Media Type Supported
Twisted Pair
Network & Communication
Ethernet Technology
Fast Ethernet
Network Standard
10/100Base-TX
Interfaces/Ports
Network (RJ-45)
Yes
Serial Port
Yes
Number of Network (RJ-45) Ports
1
Number of Serial Ports
2
Power Description
Input Voltage
120 V AC
Physical Characteristics
Height
0.9"
Width
2.9"
Depth
3.7"
Weight (Approximate)
9.17 oz
Miscellaneous
Package Contents
Conettix ITS-D6686-UL Device Server
1 x Plug-in Power Supply
2 x DB9 F/F Null Modem Serial Cables (1.83 m [6 ft])