The Pace1PRM is a long range Ethernet receiver. It is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable. Applications:
Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
Extend Network link distance in an industrial environment over 610m.
Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper head end equipment.
Manufacturer
Altronix Corporation
Manufacturer Part Number
PACE1PRM
Manufacturer Website Address
http://www.altronix.com
Brand Name
Altronix
Product Name
IP and PoE+ over Extended Distance UTP or CAT5e
Marketing Information
The Pace1PRM is a long range Ethernet receiver. It is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable. Applications:
Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
Extend Network link distance in an industrial environment over 610m.
Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper head end equipment.
Product Type
Network Extender
Network (RJ-45)
Yes
Height
1"
Width
3.5"
Depth
3.5"
Receiver Weight (Approximate)
4 oz
Additional Information
Input:
Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W).
Ethernet:
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5e or a single twisted pair UTP.
Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol.
Throughput is rated to pass 100mbps of data.
UTP (Single Twisted Pair UTP):
Distance: up to 152m @ 100mbps.
CAT5e or Higher:
Distance: up to 500m @ 100mbps.
LED Indicators:
Green - PoE ON (by respective RJ45 jack).
RJ45 jack: Yellow and Green LED IP Link status, 10/100Base-T/active.
Environmental:
Operating Temperature:
-4° F to 120.2° F (-20° C to +49° C).
Storage Temperature:
-22° to 158° F (-30° to +70° C).
Relative humidity: 20 to 85%, non-condensing.
Operating Altitude: - 1000 to 6,561.679 ft. (- 304.8 to 2000m).
Functions:
Auto detection and protection of legacy non-PoE cameras/devices.
Environmentally Friendly
Yes
Country of Origin
United States
Limited Warranty
Lifetime
General Information
Manufacturer
Altronix Corporation
Manufacturer Part Number
PACE1PRM
Manufacturer Website Address
http://www.altronix.com
Brand Name
Altronix
Product Name
IP and PoE+ over Extended Distance UTP or CAT5e
Marketing Information
The Pace1PRM is a long range Ethernet receiver. It is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable. Applications:
Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
Extend Network link distance in an industrial environment over 610m.
Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper head end equipment.
Product Type
Network Extender
Interfaces/Ports
Network (RJ-45)
Yes
Physical Characteristics
Height
1"
Width
3.5"
Depth
3.5"
Receiver Weight (Approximate)
4 oz
Miscellaneous
Additional Information
Input:
Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W).
Ethernet:
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5e or a single twisted pair UTP.
Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol.
Throughput is rated to pass 100mbps of data.
UTP (Single Twisted Pair UTP):
Distance: up to 152m @ 100mbps.
CAT5e or Higher:
Distance: up to 500m @ 100mbps.
LED Indicators:
Green - PoE ON (by respective RJ45 jack).
RJ45 jack: Yellow and Green LED IP Link status, 10/100Base-T/active.
Environmental:
Operating Temperature:
-4° F to 120.2° F (-20° C to +49° C).
Storage Temperature:
-22° to 158° F (-30° to +70° C).
Relative humidity: 20 to 85%, non-condensing.
Operating Altitude: - 1000 to 6,561.679 ft. (- 304.8 to 2000m).
Functions:
Auto detection and protection of legacy non-PoE cameras/devices.